Robots

Dear: CKR

It all started when I 3d printed a human skull. I noticed there were a ton of problems with it. It was dang slow and even when it was printing fast it did a poor job printing. That is why I am making a new 3D printer. This 3D printer is an sla 3D printer of my own design. It...

nschreiber0813's picture
Author: 
nschreiber0813
Last updated: 
3 Jan 2017 - 09:12
In progress

This is a simple project, called LED candle. I will be using yellow LED’s of 2 and a simple PWM code that runs on AVR (ATmega328p) chip make’s the LED flickering that almost looks like candle. :P for candle I will be using LED’s+translucent paper.

...

viswesh's picture
Author: 
viswesh
Last updated: 
19 Nov 2016 - 12:08
Finished
OVERVIEW

Ok, this is not a robot. It doesn't move, talk, sing, listen, burn down houses or other robotic things. It does look kind of cool and flashes menancingly at you with it's multi color flashing, dancing LED. Scary enough isn't it? This is just a little side project to play with.

THE...
Protowrxs's picture
Author: 
Protowrxs
Last updated: 
16 Nov 2016 - 20:50
Finished
TWEETY BOT

Built 11/2015

Tweety Bot started out an a much more ambitious project.

I would hope so I guess since all he actually does is sit around and Tweet. Anyhow, the original goal was to build a birdy bot that could sit on your arm or shoulder and use a gryo/accel sensor to...

Protowrxs's picture
Author: 
Protowrxs
Last updated: 
14 Nov 2016 - 21:29
Finished

This is Lunchbox, a line Following robot built as a technology demonstrator for a competition at my local hackerspace. The competition rules state that you must build a line following robot that will complete the course in the fastest time but you are not allowed to use a microcontroller or any...

Author: 
Mr_Booo
Last updated: 
7 Oct 2016 - 12:56
Finished

Dear: CKR

Just letting you guys know I have finally finished the chassis for my trinity robot attempt #3. This is my third attempt to build a robot that qualified for the trinity challenge. The last attepts didn't qualify. Just letting you guys know this is not the first chassis of this...

nschreiber0813's picture
Author: 
nschreiber0813
Last updated: 
1 Aug 2016 - 18:41
In progress

This is Ava. I've been working on her about a year in spare time. She is my best work to date. Ava is a general purpose utlity bot that is social, likes to tell jokes, and can teach people a lot of things. She presented on a panel at SXSW2016 that discussed robot improv comedy. She is...

Author: 
mtriplett
Last updated: 
26 Jul 2016 - 13:12
In progress

Hello my name is Matt and i have a robot that my Dad is helping me build, I'm ten years old. My Dad's name is peter, he helps me becauce he is good at it. Max is a diffenental drive robot, l've been working on him for over a year, he has three wheels two speakers at the front and alot of circuit...

Author: 
mat_heim
Last updated: 
18 Jul 2016 - 03:08
In progress

I designed this robot control board for my students to be used as a basis for an entry into a robotics competition hosted by a university near us. It is shown on a Magician Chasis that I used as a test platform.

http://www.robotscience....

Author: 
Mr_Booo
Last updated: 
15 Jun 2016 - 10:39
Finished

Robbie has been a long term project (7 years) mechanically Robbie is complete there will still be upgrades and improvements but overall I'm happy with the design the shoulder gearboxes will be replaced soon with a version that has bearings and magnetic encoders stronger motor drivers but they...

Author: 
peter_heim
Last updated: 
9 Apr 2017 - 18:41
In progress